Skip to content
FREE NEXT DAY DELIVERY ON ORDERS OVER £100
FREE NEXT DAY DELIVERY - ORDERS OVER £100
LOCK/JIG - Trend Lock Jig comes with TR37 Lock Cutter

LOCK/JIG - Trend Lock Jig comes with TR37 Lock Cutter

£83.32 - £83.32
£83.32
£83.32 - £83.32
£83.32

£99.98 Inc. VAT

Next Day Delivery Available

Straight to your door from our London-based store.

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. Supplied with FREE lock cutter T37x1/2TC.

  • For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
  • Deeper mortises can be achieved with a suitable size of auger bit.
  • Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
  • Steel plates & body.
  • An auger bit and drill is required to complete deep mortises.
  • The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Door thickness min. - 34 mm

Door thickness max. - 58 mm
Template outer size - 234.3 x 59.8 x1.5mm

Lock faceplate sizes

Metric D x OL (Imperial D x OL approx.)
Template
22.2x156 mm (7/8"x 6 1/8") 1
22.5x152.5 mm (7/8"x 6") 2
25.4x121 mm (1"x 4 3/4") 3
25.4x127.5 mm (1"x 5") 4
25.4x133.5 mm (1"x 5 1/4") 5
25.4x145 mm (1"x 5 3/4") 6
25.4x153 mm (1"x 6") 7
25.4x156.5 mm (1"x 6") 8
25.4x165.5 mm (1"x 6 1/2") 9
25.4x177 mm (1"x 7") 10
25x57.5 mm (1"x 2 1/4") 11 UPPER
26x56.5 mm (1"x 2 1/4") 11 LOWER
25.6x162mm (1"x 6 3/8") 12

Lock mortise sizes

Metric D x OL (Imperial D x OL) Template
16x72 mm* (5/8" x 2 7/8") A
16x107 mm* (5/8" x 4 1/4") B
19x78 mm* (3/4" x 3 1/8") C
19x109 mm* (3/4" x 4 1/4") D